Metal office and business building furniture rust treatment process for office and business building furniture

1. Avoid electroplating office furniture. If there is electroplated office furniture, it is best not to place it in a dark and humid place.

2. Rusty electroplated furniture should be removed in time. Small plated pieces can be put into a basin filled with organic oil and soaked for about 12 hours. Large plated pieces can be wiped with cotton gauze dipped in machine oil and applied to the rusted area. After a while, the rust can be removed by wiping it back and forth. rust.

3. If some office and commercial building furniture with electroplated accessories appears yellowish brown, you can use some neutral oil to gently wipe the furniture, which can effectively prevent the further spread of mesh rust.

4. Wipe the electroplated furniture with a damp cloth. When washing the surface of electroplated office business chairs or sofas made of artificial leather with soapy water or washing powder, try not to get the metal plating parts wet.

5. Wipe frequently with neutral machine oil or sewing machine oil to prevent the mesh from continuing to expand and causing the electroplating protective layer to degrade and rust.

1. White blank polishing: hand-grind with 180#-240# sandpaper to remove stains, and polish to make the surface of the base material smooth and smooth to avoid uneven coloring when coloring the base.

2. Spray base color: Use colorant to spray evenly according to the color plate, and let it dry for 5-10 minutes.

3. Sealed bottom: Use long-moisture paint CJ-104 to seal the bottom and spray it thinly, evenly spraying a "cross", the main purpose is to avoid sinking and facilitate even coloring, monotonous for 3-4 hours.

4. Grinding: After the first coat of primer is dry, use 320#-400# sandpaper to hand-grind to make the surface of the substrate smooth and free of sand marks.

5. Wipe Grace: Use a fine cloth or brush to apply to the end surface texture to fill the conduit. Wipe evenly and keep the color consistent after cleaning. Leave it dry for 3-4 hours.

6. Spray primer: Spray long-moisture paint CJ-107 (PU special clear and transparent primer), spray two "crosses" evenly, and dry for 4-6 hours. The main purpose here is to protect the base color toner and reduce the amount of paint. Film thickness and material surface lubrication.