Preventing furniture used in business offices from getting damp and classifying materials

1. The metal handrails of furniture will rust after getting wet. When iron furniture gets wet, the paint on the surface will fall off and cause spots. Once the paint on the iron furniture peels off, it must be repaired in time. Where there is condensation, wipe it off immediately with a dry cloth to prevent it from rusting. Metal furniture should be wiped frequently with oil cloth dipped in a soft cleaning cloth, and in humid weather use a dry cloth. If rust has appeared, wipe it off with a dishcloth dipped in anti-rust agent, and then polish it with a dry cloth.

2. When leather furniture gets damp, the surface will harden, mold spots will appear, and in severe cases, it will cause fading and deformation. For furniture used in business offices, it is recommended that in humid weather, use a dry cloth to wipe off the moisture on the surface, and use mildew remover to remove mold spots. After each cleaning of the sofa, apply a layer of leather maintenance oil or special maintenance mink oil on the surface. Leather sofas can be properly placed with some desiccant.

3. Solid wood furniture will absorb water and swell when it gets damp. It is recommended to use special cleaning agents or protective wax to maintain the furniture used in business offices. Apply the protective wax evenly on the surface to form a protective film, which can not only prevent moisture but also maintain its luster. . It is best to put waterproof mats under furniture that is afraid of water.

4. For cloth furniture, it is best to use sofa towels with good water absorption and change them frequently.

1. MFC material desktop board

This is a material label that now appears in the material introduction of furniture manufacturers used in business offices. Many people may not understand the meaning of these three letters when they first learn about it. In fact, MFC is melamine board, which is specially used in business offices. The furniture tabletops and baffles used are manufactured to be environmentally friendly and durable, with strong anti-scratch and anti-scratch properties, and are fireproof, moisture-proof, and acid-corrosion resistant.

2. MDF material desktop board

This material actually refers to medium-density fiberboard, or density board, which has a very high density, so the board is slightly heavy, has good stability, has strong bending resistance, and the made panel looks good Flat, fine and smooth. A melamine finish can also be applied.

3. Solid wood material panel

The solid wood panel materials currently used as furniture tables for corporate business offices are mostly logs such as pine or ash, because such wood is cheap and fits the corporate budget plan. However, solid wood panels must be protected by painting, which greatly reduces the environmental protection of solid wood desktops. Therefore, sufficient time must be allowed for ventilation and weathering before use.

4. Acrylic board material

Acrylic sheet is a chemical polymer material whose main component is methyl methacrylate. The material is classified into the category of organic glass, but in fact it is more in line with the characteristics of plastic materials. After being made into a sheet, it looks like plastic. Acrylic panels are characterized by smoothness and beauty, strong anti-fouling ability, and high temperature resistance. However, this material has a high cost and is rarely used in furniture spaces for public business offices. It is generally seen at reception desks and business processing Furniture table for office use.